SOME REASONS & SOLUTIONS FOR PVC PIPE LEAKS

 PVC pipes broadly referred to as Polyvinyl Chloride Pipes are known to be a choice of a wide range of customers. PVC pipes are known to be used for various plumbing purposes for residential as well as commercial sectors.

PVC pipes are not at all considered reliable. After some time or so they are prone to breakage and leakage. Minor problems can be fixed but in case a problem arises it can cause you acute headache and chaos and you have to go for an entire pipe replacement.

Let us first understand some reasons behind the leakages of PVC pipes:

1.   Issues Related to Installation

In most of the cases, leakages of PVC pipes arise around the joints which are a clear result of improper and poor installation. One of the primary causes of leaks is short insertion also known as loose fitting. The gaps caused by leaks result in accumulating contaminants which further lead to the failure of the piping system.

2.   Exposure to Direct and Extreme Sunlight

If your PVC pipes are running above the ground level, it means it is coming in direct contact with sunlight. Continuous exposure to sunlight makes the pipes fragile and weak which further lead to breakage. Stainless steel pipes are known to be capable of withstand even adverse weather and atmospheric conditions. Hence, these are considered as the best plumbing option. To replace your PVC pipes with stainless fittings, come in contact with one of the most prominent and prestigious manufacturers of stainless steel pipes and fittings: Rhinox.

3.   Extreme Level of Cold Temperature

Extreme cold temperature might also be the reason behind PVC pipes getting weak and brittle. In order to prevent the pipes getting damaged, insulation is considered as an effective solution.

Ways to Fix Leaking PVC Pipes

1.   Using Silicone or Rubber Pipe Repair Tape

Some features of repair tape are: being sticky, gummy, stretchy and self-fusing. In case of small leaks, using repair time is one of the best solutions. What you have to do is to stretch and wrap the tape around the area where there is damage. The tape helps in sealing the area where there is leakage completely. In case there are multiple leaks on a single pipe, what you have to do is to wrap the tape in a spiral direction.

2.   Using Fiberglass Cloth

Water-activated resin is used by fiberglass wrap. When it is wrapped around the damaged area, it tends to get hardened after a few minutes which further helps in stopping the leaks.

3.   Replacement of Pipe System

In case your plumbing system is old, the chances are that the pipes are made up of plastic or PVC. In case your pipes are made up of iron or lead, these are to be definitely replaced as the material is highly corrosive and toxic. It can have a huge impact on your health. Your old iron pipes need to be replaced as they are prone to rust. One of the most superior choices is to go for stainless Steel fittings as the material is highly resistant to corrosion and is considered as one of the most hygienic materials.

4.   Hose Clamps & Rubber Tape

If you are looking to fix small leaks temporarily, rubber tape is to be wrapped around the damaged area. The next step is to compress the area by tightening both the hose clamps. One thing to keep in mind is to utilize this method on a pipe surface which is smooth. In the case of edges and contours, it won’t work.

When you are sure that you have to go for pipe replacement, getting in touch with experts is of utmost importance. To get more knowledge about stainless steel pipes and fittings, get in touch with us by visiting our website: https://rhinoxindia.com/